Click on the image to check the artwork
1. Mould Base Standard : LKM Brand, Hasco, DME ect ;
2. Cavity/CoreMaterial :
2738,2343,DIN1,S130,2344,738H,718,8407,S136,NAK80,P20,KD-61,NIMAX ect ;
3. Hardness of the steel :20-60HRC ;
4. Cavity Qty : Single-cavity / Multi-cavity ;
5. Runner :
Yudo/ Mastip/ HASCO/ DME/ MOLD-MASTER Hot runner or Cold runner ;
6. Gate :
Submarine gate, side/edge gate, direct gate ect ;
Handle Mould